Home
Ask a Question
About
Contact
Advertise
Sitemap

Data Communication & Network

Data Communication and Network| Multiple Choice | Questions And Answer | Test Bank | Exam

Home
Translate

Data Communication & Network Data Communications The SONET network topology is a ____.

The SONET network topology is a ____.

Data Communications

The SONET network topology is a ____.

a. star c. bus
b. ring d. star-bus

Answer: B

Learn More :

Share this

Share on Facebook Tweet on Twitter Plus on Google+

« Prev Question

Next Question »

Search your questions here...

Trending Questions

A network administrator issues the ping 192.168.2.5 command and successfully tests connectivity to a host that has been newly connected to the network. Which protocols were used during the test? (Choose two.)

A network administrator issues the ping 192.168.2.5 command and successfully tests connectivity to a host that has been newly connected to...
A network administrator changes the configuration register to 0x2142 and reboots the router. What are two results of making this change? (Choose two.)

A network administrator changes the configuration register to 0x2142 and reboots the router. What are two results of making this change? (...
The network administrator has asked you to check the status of the workstation's IP stack by pinging the loopback address. Which address would you ping to perform this task?

The network administrator has asked you to check the status of the workstation's IP stack by pinging the loopback address. Which addre...
Connecting two wide area networks requires devices such as high-speed ____.

Connecting two wide area networks requires devices such as high-speed ____. a. bridges b. hubs c. reflectors d. routers Answ...
A parabolic dish antenna is a(n) _______ antenna.

A parabolic dish antenna is a(n) _______ antenna. a. omnidirectional b. horn c. unidirectional d. bidirectional Answer:...
The amplitude of a signal can be expressed as volts, ____, or watts.

The amplitude of a signal can be expressed as volts, ____, or watts. a. hertz b. amps c. bits d. bytes Answer: B
The three basic components of analog and digital signals are: amplitude, frequency, and ____.

The three basic components of analog and digital signals are: amplitude, frequency, and ____. a. hertz b. baud c. cycles d. phase ...
A ___________ assigns levels of risk to various threats to network security by comparing the nature of the threats to the controls designed to reduce them.

A ___________ assigns levels of risk to various threats to network security by comparing the nature of the threats to the controls designe...
In its simplest form, the __________ has two columns: the first column lists every computer and device in the network, while the second column lists the computer or device to which that computer should send messages, if they are destined for the computer in the first column.

In its simplest form, the __________ has two columns: the first column lists every computer and device in the network, while the second co...
_______ is a collection of many separate networks.

_______ is a collection of many separate networks. a. A LAN b. An Internet c. A Wan d. A link Answer: B

Blog Archive

May (151)
March (100)
November (139)
October (100)
September (252)
July (25)
May (29)
April (132)

Label

CCNA Data Communication & Network Data Communication & Networking Data Communications DataCom

Powered by Blogger.

Copyright © 2015 Data Communication & Network | Term Of Service | Disclaimer | Privacy Policy | DMCA