Eliminating jitter to generate a pure carrier signal in an analog circuit is impossible.
Answer: True
The distance between repeaters or amplifiers on a telephone circuit is determined by the amount of power gained per unit length of the transmission.
Answer: False
When we amplify the signal on an analog circuit, we also amplify any noise that is present on the circuit.
Answer: True
In an odd parity-checking scheme, the parity bit is set to make the total number of ones in the byte (including the parity bit) an even number.
Answer: False
Parity checking can only detect an error when an even number of bits are switched.
Answer: False
The simplest method for error correction is retransmission.
Answer: True
One type of forward error correction is the Hamming code.
Answer: True
Forward error correction is commonly used in satellite transmission.
Answer: True
Point-to-point Protocol is a byte-count-oriented protocol.
Answer: True
Answer: True
The distance between repeaters or amplifiers on a telephone circuit is determined by the amount of power gained per unit length of the transmission.
Answer: False
When we amplify the signal on an analog circuit, we also amplify any noise that is present on the circuit.
Answer: True
In an odd parity-checking scheme, the parity bit is set to make the total number of ones in the byte (including the parity bit) an even number.
Answer: False
Parity checking can only detect an error when an even number of bits are switched.
Answer: False
The simplest method for error correction is retransmission.
Answer: True
One type of forward error correction is the Hamming code.
Answer: True
Forward error correction is commonly used in satellite transmission.
Answer: True
Point-to-point Protocol is a byte-count-oriented protocol.
Answer: True